Collaborative study for the establishment of Ph. Eur. Biological Reference Preparation for Human tetanus immunoglobulin batch 2.

This publication describes the outcome of a project to develop a replacement European Pharmacopoeia (Ph. Eur.) Biological Reference Preparation (BRP) for Human tetanus immunoglobulin (TIg) as well as for the World Health Organization (WHO) International Standard (IS) for Tetanus Immunoglobulin, Human. Bulk TIg was kindly provided by a European manufacturer and was used to prepare the candidate standard. The candidate standard was freeze-dried and calibrated in an international collaborative study jointly co-ordinated by the Medicines & Healthcare products Regulatory Agency (MHRA) and the European Directorate for the Quality of Medicines & HealthCare (EDQM, Council of Europe). The results of this study show that there was good agreement between laboratories for the potency estimates obtained for the candidate standard relative to the current WHO IS/Ph. Eur. BRP. The study also demonstrated that the candidate standard is suitable for use in Ph. Eur. assays for potency testing of TIg products and there was good agreement in the potency estimates obtained using the different assay methods included in the study. Accelerated degradation studies performed at the MHRA over a period of 4 years suggest that the freeze-dried candidate standard will be very stable. The candidate standard was established as Ph. Eur. BRP for Human tetanus immunoglobulin, batch 2 with an assigned potency of 45 IU/ampoule. The same preparation was also adopted by the WHO Expert Committee on Biological Standardization (ECBS) to serve as the WHO 2nd IS for Tetanus Immunoglobulin, Human (13/240).

Collaborative study for the establishment of Ph. Eur. Biological Reference Preparation for Human tetanus immunoglobulin batch 2.

This publication describes the outcome of a project to develop a replacement European Pharmacopoeia (Ph. Eur.) Biological Reference Preparation (BRP) for Human tetanus immunoglobulin (TIg) as well as for the World Health Organization (WHO) International Standard (IS) for Tetanus Immunoglobulin, Human. Bulk TIg was kindly provided by a European manufacturer and was used to prepare the candidate standard. The candidate standard was freeze-dried and calibrated in an international collaborative study jointly co-ordinated by the Medicines & Healthcare products Regulatory Agency (MHRA) and the European Directorate for the Quality of Medicines & HealthCare (EDQM, Council of Europe). The results of this study show that there was good agreement between laboratories for the potency estimates obtained for the candidate standard relative to the current WHO IS/Ph. Eur. BRP. The study also demonstrated that the candidate standard is suitable for use in Ph. Eur. assays for potency testing of TIg products and there was good agreement in the potency estimates obtained using the different assay methods included in the study. Accelerated degradation studies performed at the MHRA over a period of 4 years suggest that the freeze-dried candidate standard will be very stable. The candidate standard was established as Ph. Eur. BRP for Human tetanus immunoglobulin, batch 2 with an assigned potency of 45 IU/ampoule. The same preparation was also adopted by the WHO Expert Committee on Biological Standardization (ECBS) to serve as the WHO 2nd IS for Tetanus Immunoglobulin, Human (13/240).

Collaborative study for the establishment of replacement batches of Ph. Eur. Heparin Low-Molecular-Mass for Calibration CRS.

An international collaborative study was run within the framework of the Biological Standardisation Programme (BSP) of the Council of Europe and the Commission of the European Union to establish replacement batches for European Pharmacopoeia (Ph. Eur.) Heparin Low-Molecular-Mass (LMM) for calibration Chemical Reference Substance batch 3 (CRS3) used for the characterisation of LMM heparins by high performance size-exclusion chromatography. Two candidate batches (A, cCRS4 and B, cCRS5) were filled using the same material as the existing official calibrants, adopted with either an assigned number-average molecular mass (Mna) or a broad standard table (BST). Fifteen laboratories evaluated the suitability of these candidate batches for use as calibrants with the pharmacopoeial dual refractive index/ultraviolet (RI/UV) detector calibration method, as well as with a modified mobile phase and the BST calibration method. Seven preparations of LMM heparin were tested. The results confirmed that the proposed batches are suitable for use with the same characteristic Mna as CRS3 and with the BST established for the World Health Organization (WHO) 2nd International Standard (IS). The BST calibration method gave comparable results to the RI/UV method, while showing better reproducibility, being easier to perform and requiring no calibrant with UV absorbance. The modified mobile phase had no impact on the calculated values while improving separation between the calibrant and salt peaks. The two candidate batches were adopted as Ph. Eur. Heparin LMM for calibration CRS batches 4 and 5, respectively, with the assigned Mna value of 3800 and a BST. In anticipation of the depletion of the calibrant required for use with the RI/UV method, and taking into account the unlikely procurement of a new lot of suitable starting material, it was recommended to include the BST method in Ph. Eur. monograph 0828, Heparins, low-molecular-mass. In order to improve peak separation, it was also recommended to include the use of ammonium acetate solution as mobile phase in the monograph, both for the Ph. Eur. RI/UV and the proposed BST calibration methods. Further to this study, Ph. Eur. monograph 0828 was revised to replace the RI/UV method by the BST method. This contributed to the harmonisation of methods across regions, thereby facilitating a concerted global action for the development and establishment of the next batches of calibrants for the quality control of LMM heparins.

Establishment of Ph. Eur. Somatropin/desamidosomatropin resolution mixture Chemical Reference Substance batch 2.

The control of somatropin products according to the monographs of the European Pharmacopoeia (Ph. Eur.) requires a system suitability preparation for the test for related proteins by liquid chromatography. A preparation consisting in a mixture of somatropin and desamidosomatropin, such as the Ph. Eur. Somatropin/desamidosomatropin resolution mixture Chemical Reference Substance (CRS), is to be used to ascertain adequate resolution of the chromatographic setup. Due to low stocks, the Biological Standardisation Programme (BSP) of the Council of Europe and the European Union ran a study to establish a new batch of this system suitability CRS. A freeze-dried candidate batch (cCRS2) was produced and tested at the European Directorate for the Quality of Medicines and HealthCare (EDQM, Council of Europe). The resolution between the peaks due to somatropin and desamidosomatropin was 1.7 and the symmetry factor for the somatropin peak was 1.2. The mean percentage area of the desamidosomatropin peak was 14.6 %. These results showed that cCRS2 is suitable for its intended purpose. Based on these data, in May 2020 the Ph. Eur. Commission established the candidate batch as Ph. Eur. Soma-tropin/desamidosomatropin resolution mixture CRS batch 2.

Collaborative study for the calibration of Ph. Eur. Heparin Low-Molecular-Mass for Assay Biological Reference Preparation batch 11.

European Pharmacopoeia (Ph. Eur.) monograph 0828 prescribes two in vitro assays to evaluate the biological activity of low-molecular-mass heparin products. These assess the capacity of low-molecular-mass heparins to accelerate the inhibition of factor Xa and factor IIa by antithrombin. A reference standard calibrated in International Units (IU) such as the Heparin low-molecular-mass for assay Biological Reference Preparation (BRP), is required to express results. Due to low stocks, the Biological Standardisation Programme (BSP) of the Council of Europe and the European Union launched an international collaborative study to establish a replacement batch for the current Heparin low-molecular-mass BRP (BRP10). Thirteen Official Medicines Control Laboratories and manufacturers contributed data to calibrate a candidate batch against the World Health Organization (WHO) 3rd International Standard for Heparin, low molecular weight (11/176; 3rd IS) using chromogenic assays. The overall anti-Xa and IIa activities of the candidate BRP against the 3rd IS based on the participants' calculations and on central calculation at the European Directorate for the Quality of Medicines & HealthCare (EDQM) were very close. The inter-laboratory variation for both assays was between 2.8 % and 7.5 %. The study data confirmed the assigned activities of BRP10. Based on the results of this collaborative study, in December 2019 the Ph. Eur. Commission adopted the candidate BRP as Heparin low-molecular-mass for assay BRP batch 11 with assigned anti-Xa activity of 110 IU/mL and anti-IIa activity of 37 IU/mL.

Collaborative study for the calibration of Ph. Eur. Heparin Sodium Biological Reference Preparation batch 4.

An international collaborative study was organised under the aegis of the Biological Standardisation Programme (BSP) of the Council of Europe and the European Union to calibrate a replacement batch for the European Pharmacopoeia (Ph. Eur.) Heparin sodium Biological Reference Preparation (BRP). Seventeen laboratories contributed data to value assign a candidate batch (cBRP4) in International Units (IU) against the WHO 6th International Standard for Unfractionated Heparin using chromogenic and sheep plasma clotting assays according to Ph. Eur. texts 2.7.5. on unfractionated heparin and 0878 on human antithrombin III. The continuity of consecutive batches of BRP was evaluated by including BRP3 in the set of test samples. The central analysis of the study data showed good precision and reproducibility of both chromo-genic and clotting assays among laboratories. Based on the study data, the Ph. Eur. Commission adopted cBRP4 as Ph. Eur. Heparin sodium BRP4 with assigned activities of 985 IU/mL for anti-IIa assays, 995 IU/mL for anti-Xa assays and 1035 IU/mL for sheep clotting assays.

Calibration of the WHO 5th IS for Blood Coagulation Factor IX, Concentrate and Ph. Eur. Human Coagulation Factor IX Concentrate Biological Reference Preparation Batch 3 and investigation of the suitability of an IS as potency standard for purified full-length recombinant FIX.

A joint World Health Organization (WHO) - European Directorate for the Quality of Medicines & HealthCare (EDQM) study was run to calibrate the WHO 5th International Standard (IS) for Blood Coagulation Factor IX (FIX), Concentrate, and European Pharmacopoeia (Ph. Eur.) Human Coagulation Factor IX concentrate Biological Reference Preparation (BRP) Batch 3. The suitability of the 4th IS as a potency standard for purified full-length recombinant FIX (rFIX) was also investigated. Forty-nine laboratories contributed data for the calibration of 2 plasma-derived FIX candidates, relative to the 4th IS, from clotting and chromogenic assays. The intra-laboratory variability was reasonably low; the inter-laboratory variation was lower for sample B (14/148) than for sample C (14/162). Although there were no discrepancies between clotting and chromogenic assays, a significantly lower potency was obtained for sample C with clotting assays when buffer rather than FIX-deficient plasma was used as pre-diluent. A significant assay discrepancy was observed with estimates for the 4th IS for Blood Coagulation Factors FII, VII, IX, X, Plasma against the 4th IS, resulting in a clotting to chromogenic activity ratio of 1.11. The study also investigated the comparability of the plasma-derived concentrate standard with the rFIX products and considered the establishment of an IS for rFIX. The 3 rFIX products currently licensed were represented in this study. Data from 49 laboratories for 2 rFIX candidates were received, with additional results for another full-length rFIX test sample returned by 6 laboratories. The intra-laboratory variability when the rFIX samples were assayed against the 4th IS was acceptably low. Although the full-length rFIX could be assayed against the plasma-derived 4th IS and provided statistically valid results, there were large discrepancies among the clotting assays using different APTT reagents. The inter-laboratory variability of the chromogenic assays was similarly high. There were also significant clotting and chromogenic assay discrepancies. The data from the present study indicate that a recombinant standard for rFIX products will minimise assay discrepancies and improve inter-laboratory agreement. However, they also underline that the value assignment of the 1st rFIX IS needs careful consideration. The Expert Committee on Biological Standardization (ECBS) of WHO was therefore not requested to consider the establishment of an IS for rFIX. In order to ensure continued harmonised standards, sample B (14/148) was established as the WHO 5th IS for Blood Coagulation Factor IX, Concentrate, and as Ph. Eur. Human Coagulation Factor IX, concentrate BRP Batch 3 with the functional activity of 10.5 IU/ampoule.

Collaborative study on saccharide quantification of the Haemophilus influenzae type b component in liquid vaccine presentations.

Before release onto the market, it must be demonstrated that the total and free polysaccharide (poly ribosyl-ribitol-phosphate, PRP) content of Haemophilus influenzae type b (Hib) vaccine complies with requirements. However, manufacturers use different methods to assay PRP content: a national control laboratory must establish and validate the relevant manufacturer methodology before using it to determine PRP content. An international study was organised by the World Health Organization (WHO), in collaboration with the Biological Standardisation Programme (BSP) of the Council of Europe/European Directorate for the Quality of Medicines & HealthCare (EDQM) and of the European Union Commission, to verify the suitability of a single method for determining PRP content in liquid pentavalent vaccines (DTwP-HepB-Hib) containing a whole-cell pertussis component. It consists of HCl hydrolysis followed by chromatographic separation and quantification of ribitol on a CarboPac MA1 column using high-performance anion exchange chromatography coupled with pulsed amperometric detection (HPAEC-PAD). The unconjugated, free, PRP is separated from the total PRP using C4 solid-phase extraction cartridges (SPE C4). Ten quality control laboratories performed two independent analyses applying the proposed analytical test protocol to five vaccine samples, including a vaccine lot with sub-potent PRP content and very high free PRP content. Both WHO PRP standard and ribitol reference standard were included as calibrating standards. A significant bias between WHO PRP standard and ribitol reference standard was observed. Study results showed that the proposed analytical method is, in principle, suitable for the intended use provided that a validation is performed as usually expected from quality control laboratories.

Collaborative study for the establishment of the Ph. Eur. Hepatitis E virus RNA for NAT testing biological reference preparation batch 1.

A new European Pharmacopoeia (Ph. Eur.) biological reference preparation (BRP) had to be established further to the decision to include nucleic acid testing (NAT) for the detection of hepatitis E virus (HEV) RNA in the monograph Human plasma (pooled and treated for virus inactivation) (1646). To this purpose, an international collaborative study was launched in the framework of the Biological Standardisation Programme (BSP) of the European Directorate for the Quality of Medicines & HealthCare (EDQM) and the Commission of the European Union (EU). The study was run in conjunction with the establishment of the 1st World Health Organization (WHO) international reference panel (IRP) for hepatitis E virus RNA genotypes (8578/13). Twenty-three laboratories used in-house developed and commercially available assays to calibrate a lyophilised candidate BRP prepared from a HEV 3f strain positive human plasma against the 1st WHO International Standard (IS) for HEV RNA (6329/10). Results from quantitative and qualitative assays were in good agreement and were combined to calculate an assigned potency. Real-time stability studies indicated that the candidate BRP is very stable at lower temperatures and is thus suitable for long-term use. Based on these results, in February 2016, the Ph. Eur. Commission adopted the candidate material as the hepatitis E virus RNA for NAT testing BRP batch 1, with an assigned unitage of 2.1 × 104 IU/vial (4.32 log10 IU/vial).

Collaborative study for the validation of an improved HPLC assay for recombinant IFN-alfa-2.

The current European Pharmacopoeia (Ph. Eur.) texts for Interferon (IFN)-alfa-2 include a nonspecific photometric protein assay using albumin as calibrator and a highly variable cell-based assay for the potency determination of the protective effects. A request was expressed by the Official Medicines Control Laboratories (OMCLs) for improved methods for the batch control of recombinant interferon alfa-2 bulk and market surveillance testing of finished products, including those formulated with Human Serum Albumin (HSA). A HPLC method was developed at the Medical Products Agency (MPA, Sweden) for the testing of IFN-alfa-2 products. An initial collaborative study run under the Biological Standardisation Programme (BSP; study code BSP039) revealed the need for minor changes to improve linearity of the calibration curves, assay reproducibility and robustness. The goal of the collaborative study, coded BSP071, was to transfer and further validate this improved HPLC method. Ten laboratories participated in the study. Four marketed IFN-alfa-2 preparations (one containing HSA) together with the Ph. Eur. Chemical Reference Substance (CRS) for IFN-alfa-2a and IFN-alfa-2b, and in-house reference standards from two manufacturers were used for the quantitative assay. The modified method was successfully transferred to all laboratories despite local variation in equipment. The resolution between the main and the oxidised forms of IFN-alfa-2 was improved compared to the results from the BSP039 study. The improved method even allowed partial resolution of an extra peak after the principal peak. Symmetry of the main IFN peak was acceptable for all samples in all laboratories. Calibration curves established with the Ph. Eur. IFN-alfa-2a and IFN-alfa-2b CRSs showed excellent linearity with intercepts close to the origin and coefficients of determination greater than 0.9995. Assay repeatability, intermediate precision and reproducibility varied with the tested sample within acceptable ranges. Test accuracy estimated by comparing the values obtained by the participants to the declared contents determined by the manufacturers was good despite the absence of a common reference preparation. In conclusion, the present study showed that the new method is suitable, reproducible and transferable. Proposals for the revision of Ph. Eur. texts are presented.

Collaborative study for the calibration of replacement batches for the heparin low-molecular-mass for assay biological reference preparation.

The European Pharmacopoeia (Ph. Eur.) prescribes the control of the activity of low molecular mass heparins by assays for anti-Xa and anti-IIa activities (monograph 0828), using a reference standard calibrated in International Units (IU). An international collaborative study coded BSP133 was launched in the framework of the Biological Standardisation Programme (BSP) run under the aegis of the Council of Europe and the European Commission to calibrate replacement batches for the dwindling stocks of the Heparin low-molecular-mass for assay Biological Reference Preparation (BRP) batch 8. Thirteen official medicines control and manufacturers laboratories from European and non-European countries took part in this study to calibrate two freeze-dried candidate batches against the 3rd International Standard (IS) for heparin, low molecular weight (11/176; 3rd IS). The Heparin low-molecular-mass for assay BRP (batch 8) was also included in the test panel to check the continuity between subsequent BRP batches. Taking into account the stability data, the results of this collaborative study and on the basis of the central statistical analysis performed at the European Directorate for the Quality of Medicines & HealthCare (EDQM), the 2 candidate batches were officially adopted by the Commission of the European Pharmacopoeia as Heparin low-molecular-mass for assay BRP batches 9 and 10 with assigned anti-Xa activities of 102 and 100 IU/vial and anti-IIa activities of 34 and 33 IU/vial respectively.

Collaborative study for the calibration of the Ph. Eur. prekallikrein activator in albumin BRP batches 4, 5 and 6.

An international collaborative study was organised by the European Directorate for the Quality of Medicines & HealthCare (EDQM, Council of Europe) to calibrate replacement batches for the current European Pharmacopoeia (Ph. Eur.) prekallikrein activator (PKA) in albumin biological reference preparation (BRP), whose stocks were dwindling. The study was run in the framework of the Biological Standardisation Programme (BSP) of the Council of Europe and the European Union (EU) Commission. Twenty three laboratories from official medicines control authorities and manufacturers in Europe and outside Europe took part in the study. Three candidate replacement batches were produced from the same material as the one used for the World Health Organization (WHO) 2(nd) International Standard (IS) for PKA in albumin (02/168) and the Ph. Eur. PKA in albumin BRP batches 1, 2 and 3. Participants were requested to evaluate the candidate batches against the current WHO IS using their routine assay method. The Ph. Eur. PKA in albumin BRP batch 3 (BRP3) was also included in the test panel to ensure the continuity of the consecutive BRP batches. The study confirmed the stability of the PKA content of the current BRP3. The candidate batches were found to be comparable. Previous data on the starting material support its high stability. Thermal stress study on the candidate batches confirmed the stability of their PKA activity. The Commission of the Ph. Eur. officially adopted in November 2013 the 3 candidate batches as Ph. Eur. PKA in albumin BRP batches 4, 5 and 6 with an assigned content of 38 IU/vial. The activity of the 3 new batches of Ph. Eur. PKA in albumin BRP will be regularly monitored.

Collaborative study for the establishment of the WHO 3(rd) International Standard for Endotoxin, the Ph. Eur. endotoxin biological reference preparation batch 5 and the USP Reference Standard for Endotoxin Lot H0K354.

An international collaborative study was organised jointly by the World Health Organization (WHO)/National Institute for Biological Standards and Control (NIBSC), the United States Pharmacopeia (USP) and the European Directorate for the Quality of Medicines & HealthCare (EDQM/Council of Europe) for the establishment of harmonised replacement endotoxin standards for these 3 organisations. Thirty-five laboratories worldwide, including Official Medicines Control Laboratories (OMCLs) and manufacturers enrolled in the study. Three candidate preparations (10/178, 10/190 and 10/196) were produced with the same material and same formulation as the current reference standards with the objective of generating a new (3(rd)) International Standard (IS) with the same potency (10 000 IU/vial) as the current (2(nd)) IS, as well as new European Pharmacopoeia (Ph. Eur.). and USP standards. The suitability of the candidate preparations to act as the reference standard in assays for endotoxin performed according to compendial methods was evaluated. Their potency was calibrated against the WHO 2(nd) IS for Endotoxin (94/580). Gelation and photometric methods produced similar results for each of the candidate preparations. The overall potency estimates for the 3 batches were comparable. Given the intrinsic assay precision, the observed differences between the batches may be considered unimportant for the intended use of these materials. Overall, these results were in line with those generated for the establishment of the current preparations of reference standards. Accelerated degradation testing of vials stored at elevated temperatures supported the long-term stability of the 3 candidate preparations. It was agreed between the 3 organisations that batch 10/178 be shared between WHO and EDQM and that batches 10/190 and 10/196 be allocated to USP, with a common assigned value of 10 000 IU/vial. This value maintains the continuity of the global harmonisation of reference materials and unitage for the testing of endotoxins in parenteral pharmaceutical products. Based on the results of the collaborative study, batch 10/178 was established by the European Pharmacopoeia Commission as the Ph. Eur. Endotoxin Biological Reference Preparation (BRP) batch 5. The same batch was also established by the Expert Committee on Biological Standardisation (ECBS) of WHO as the WHO 3(rd) IS for Endotoxin. Batch 10/190 was adopted as the USP Endotoxin Reference Standard, lot H0K354 and vials from this same batch (10/190) will serve as the United States Food and Drug Administration (USFDA) Endotoxin Standard, EC-7.

Collaborative study for the recalibration of Ph. Eur. Heparin sodium BRP batch 3 for chromogenic potency assays.

Following the heparin adulteration crisis, the European Pharmacopoeia (Ph. Eur.) Group of Experts on Biologicals (Group 6) considered a revision of the general chapter 2.7.5. Assay of heparin with regard to the assay of the anticoagulant activity of heparin in order to replace the clotting method with more specific chromogenic methods for anti-IIa and anti-Xa activities. An international collaborative study was carried out in 3 phases under the aegis of the Biological Standardisation Programme (BSP) of the Council of Europe and the European Commission in order to recalibrate Heparin sodium Biological Reference Preparation (BRP) batch 3 for these new assays. Phase 1 confirmed the feasibility of the project, but also indicated that the composition of the buffers affects the assay results, thereby highlighting the importance of using common assay procedures. Phase 2 consisted of a collaborative study involving 15 laboratories to calibrate the anti-IIa and anti-Xa activities of Heparin sodium BRP batch 3. The collaborative study confirmed that Heparin sodium BRP batch 3 is suitable for use as a reference preparation in the proposed chromogenic assays for unfractionated heparin. It also showed that the currently defined acceptance limits (90 % to 111 %) can be maintained in the revised Ph. Eur. texts. Phase 3 of the study collected data on the impact of the new unitage on the release of products marketed in Europe. The data from 5 manufacturers, who each reported results from both the clotting and chromogenic assays for a total of 23 batches, indicated that the replacement of the pharmacopoeial method is unlikely to cause batch release issues. Based on the results of this study, the Ph. Eur. Commission assigned Heparin sodium BRP batch 3 with a potency of 1000 IU/vial for both anti-IIa and anti-Xa activities in the chromogenic assays.

International collaborative study for the calibration of the Ph. Eur. somatropin chemical reference substance batches 3 and 4 (BSP108).

An international collaborative study was carried out for the establishment of replacement batches for the European Pharmacopoeia (Ph. Eur.) Somatropin Chemical Reference Substance (CRS) batch 2. The study was organised within the framework of the Biological Standardisation Programme (BSP) of the Council of Europe and the European Commission. Seventeen laboratories from Europe, North America, South America and Australia took part in the collaborative study. The study aimed at calibrating the somatropin content of 2 candidate preparations and demonstrating their suitability to serve as a reference substance in the tests for identification, for related proteins, for dimers and related substances of higher molecular mass (HMM), for charged variants distribution and for the assay of somatropin, as prescribed by the current Ph. Eur. monographs 0950 Somatropin bulk solution, 0951 Somatropin and 0952 Somatropin for injection. Based on the results summarised herein the Ph. Eur. Commission adopted in January 2012 candidate preparation b (cCRS-b, Sample D) as somatropin CRS batch 3 with an assigned content of 3.86 mg of somatropin monomer per vial, and candidate preparation a (cCRS-a, Sample C) as somatropin CRS batch 4 with an assigned content of 2.59 mg of somatropin monomer per vial.

Calibration of the Ph. Eur. Biological Reference Preparation (BRP) for tetanus vaccine (adsorbed) batch 3.

A joint collaborative study was organised by the European Directorate for the Quality of Medicines & HealthCare (EDQM) and the World Health Organization (WHO)/National Institute for Biological Standards and Control (NIBSC) to establish replacement batches for the European Pharmacopoeia (Ph. Eur.) Tetanus Vaccine (adsorbed) Biological Reference Preparation (BRP) batch 2 and for the WHO 3rd International Standard (IS) for Tetanus toxoid (adsorbed). Two freeze-dried stabilised tetanus vaccine (adsorbed) candidate preparations (Preparation A, 08/218 and Preparation B, 08/102) were calibrated against the current 3rd IS/BRP batch 2 (Preparation C) using challenge methods in guinea pigs and mice as described in the Ph. Eur. general chapter 2.7.8. Assay of tetanus vaccine (adsorbed). They were also assayed by serology methods. The WHO 2nd IS for Tetanus toxoid adsorbed (TEXA-2) was additionally included in the sample panel as Preparation D. Thirty-four laboratories (regulatory organisations and manufacturers) from 22 countries participated in the collaborative study. The majority of participants performed 2 independent challenge tests. Nine laboratories performed challenge assays in guinea pigs and 30 laboratories performed challenge assays in mice. Eight laboratories performed serology in guinea pigs and 1 laboratory performed serology in mice. For Preparation A, the geometric mean (GM) potency estimate (with 95 % confidence interval (CI)) in guinea pigs for all laboratories that provided valid results (n = 6) was 488.5 (354.2-673.6) IU/ampoule. For valid mouse assays (n = 25) the GM potency (with 95 % CI) was 259.8 (223.5-302.0) IU/ampoule. The inter-laboratory geometric coefficient of variation (GCV) was 36 % for guinea pig assays and 45 % for mouse assays. This compared favourably with the calibration of the 3rd IS/BRP batch 2 where the inter-laboratory GCV was 36 % and 42 % in guinea pigs and mice, respectively. For Preparation B, the GM potency estimate (with 95 % CI) in guinea pigs for all laboratories that provided valid results (n = 6) was 107.9 (64.1-181.7) IU/ampoule. For valid mouse assays (n = 24) the GM potency (with 95 % CI) was 147.9 (126.3-173.1) IU/ampoule. The inter-laboratory GCV was 64.3 % for guinea pig assays and 45.2 % for mouse assays. From the collaborative study, Preparation A appeared more suitable to be the replacement Ph. Eur. BRP as it is similar to the Tetanus vaccine (adsorbed) BRP batch 2, except for nature of the stabiliser. Preparation A was confirmed to have higher potency, readily detectable tetanus toxoid, and confirmed satisfactory stability and performance in challenge assays. Preparation A was adopted in January 2011 by the Ph. Eur. Commission as the Tetanus vaccine (adsorbed) BRP batch 3, with assigned potencies of 490 IU/ampoule in the guinea pig challenge assay and of 260 IU/ampoule in the mouse challenge assay. The same Preparation A was adopted in October 2010 as the WHO 4th IS for Tetanus toxoid (adsorbed), with the assigned activity of 490 IU/ampoule from guinea pig challenge assays. A follow-up study (reporting study) was organised by the EDQM to assess the impact of the potency assigned to the BRP batch 3 for mouse challenge assays on the outcome of batch release testing in Europe. Eight laboratories including official medicines control laboratories (OMCLs) and manufacturers reported the results of their routine testing, using the BRP batch 3 in addition to their regular reference preparation. For each tested product, participants calculated the potency relative to their routine reference and relative to the BRP batch 3. No common sample panel was distributed to participants. In total, data on 40 batches of different marketed tetanus vaccines were reported. Overall, a good concordance was observed between the potencies calculated relative to the BRP batch 2 and relative to the BRP batch 3. On average, the potency estimates were 10 % lower when expressed relative to the BRP batch 3. Cases of discrepant decisions for batch release were very limited and affected mainly batches with specifications close to the pharmacopoeial requirements. The reasons for differences in estimated potencies are discussed. The study showed that the use of the BRP batch 3 with an assigned potency of 260 IU/ampoule does not result in substantial change in the potency of different marketed products. This confirmed that the mouse challenge potency value assigned to the BRP batch 3 is suitable.

Collaborative study on influenza vaccine clinical trial serology - part 1: CHMP compliance study.

The Quality of Medicines & HealthCare (EDQM, Council of Europe) and the European Union (EU) Commission to evaluate the reproducibility of clinical serology results for seasonal influenza vaccines and to assess the impact of technical differences between laboratories on the compliance with the Committee for Human Medicinal Products (CHMP) criteria set by the European Medicines Agency (EMA). The study was run in 2 phases. The present article reports the 1st phase of the study, which aimed at evaluating the variability of the results obtained by 11 laboratories (5 national control laboratories and 6 influenza vaccine manufacturers) using their routine haemagglutination inhibition (HI) assay to test a common panel of clinical trial sera. The results confirmed the limited inter-laboratory reproducibility of the HI testing of influenza vaccine clinical trial samples. In some cases a good agreement was found between laboratories, while a systematic bias or a random scatter of results was observed in other cases. Analysis of estimated systematic bias confirmed that differences between laboratories can be significant (up to 16-fold) in some cases. Correction for this bias resulted in limited improvement. Differences between laboratories were found to result in discrepant decisions on marketing acceptance of vaccines or to decisions based on compliance to different criteria. The study showed that the seroconversion (SC) and mean fold increase (MFI) criteria are more robust against systematic over- or under-estimation of titres whereas the protection rate (PR) is very sensitive to this effect. The fundamental issues with the PR criteria are discussed.

Collaborative study on influenza vaccine clinical trial serology - part 2: reproducibility study.

A collaborative study was run by the Biological Standardisation Programme (BSP) under the aegis of the European Directorate for the Quality of Medicines & HealthCare (EDQM, Council of Europe) and the European Union (EU) Commission, to address the issue of the poor standardisation of serological assays used for the evaluation of seasonal influenza vaccines in Europe. The Phase 1 of the study focused on the compliance to Committee for Human Medicinal Products (CHMP) criteria by 6 manufacturers and 5 public laboratories. It confirmed the poor inter-laboratory correlation of haemagglutination inhibition (HI) test results. Phase 2 consisted in a reproducibility study examining the impact of extended method standardisation and the use of reference sera on inter-laboratory variation. Six manufacturers and 5 public laboratories contributed HI results, while the 5 public laboratories also performed single radial haemolysis (SRH) tests on the same sample panels. Results showed that method standardisation failed to significantly improve the inter-laboratory variation. Correction for pre-vaccination titres (Beyer correction) was found to have limited effect to improve the bias constituted by the Protection Rate (PR) criterion. The reasons underlying the difficulty in standardisation of HI and SRH tests are discussed and improved approaches for the compliance testing to CHMP criteria are suggested.

Collaborative study for the establishment of replacement batches of heparin low- molecular-mass for assay biological reference preparations.

A collaborative study was run by the European Directorate for the Quality of Medicines & HealthCare (EDQM) in the context of the Biological Standardisation Programme (BSP), under the aegis of the Council of Europe and the European Commission, to establish replacement batches for the dwindling stocks of the Heparin low-molecular-mass for assay European Pharmacopoeia Biological Reference Preparation (BRP). The replacement batches of BRP are intended to be used in the assays for anti-Xa and anti-IIa activities, as described in the European Pharmacopoeia (Ph. Eur.) monograph Heparins, low-molecular-mass (0828). Three freeze-dried candidate batches were calibrated against the current International Standard (IS) for Heparin, lowmolecular- weight (2nd IS, 01/608). For the purpose of the continuity check between subsequent BRP batches, the current Heparin low-molecular-mass for assay BRP (batch 5) was also included in the test panel. Thirteen official medicines control and manufacturers laboratories from European and non-European countries contributed data. A central statistical analysis of the datasets was performed at the EDQM. On the basis of the results, the 3 candidate materials were assigned a potency of 104 IU/vial for the anti-Xa activity and 31 IU/vial for the anti-IIa activity. Taken into account the preliminary stability data and the results of this collaborative study, the 3 batches of candidate BRP were adopted in June 2010 by the Commission of the Ph. Eur. as Heparin low-molecular-mass for assay BRP batches 6, 7 and 8.

Collaborative study for the validation of alternative in vitro potency assays for human tetanus immunoglobulins.

An international collaborative study to validate 2 alternative in vitro methods for the potency testing of human tetanus immunoglobulin products was organised by the European Directorate for the Quality of Medicines & HealthCare (EDQM). The study, run in the framework of the Biological Standardisation Programme (BSP) under the aegis of the European Commission and the Council of Europe, involved 21 official medicines control and industry laboratories from 15 countries. Both methods, an enzyme-linked immunoassay (EIA) and a toxoid inhibition assay (TIA), showed good reproducibility, repeatability and precision. EIA and TIA discriminated between low, medium and high potency samples. Potency estimates correlated well and both values were in close agreement with those obtained by in vivo methods. Moreover, these alternative methods allowed to resolve discrepant results between laboratories that were due to product potency loss and reporting errors. The study demonstrated that EIA and TIA are suitable quality control methods for tetanus immunoglobulin, which can be standardised in a control laboratory using a quality assurance system. Consequently, the Group of Experts on Human Blood and Blood Products of the European Pharmacopoeia revised the monograph on human tetanus immunoglobulins to include both the methods as compendial alternatives to the in vivo mouse challenge assay.